1.5 HP Goulds Water Well Jet Pump J15S
Product Description
General Pump Specifications
Horsepower 1.5 HP
Volts 115/230 Volt
Phase 1 Phase / 3 Wire
Total Length 19.25 Inches
Suction NPT 1.25" NPT
Discharge Connection Size (NPT) 1" NPT
Manufacturer Goulds Pump
FEATURES
■ Compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. ■ Serviceable: • Back pullout design allows disassembly of pump for service without disturbing piping. • Two compartment motor for easy access to motor wiring and replaceable components. • Nozzle clean out plug in pump case. • Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring design fittings need only be hand tight to seal. ■ Impeller: F.D.A. compliant, glass filled Noryl ® is corrosion and abrasion resistant. ■ Diffuser (Guidevane): Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan® for durability and abrasion resistance. ■ Tubing and Fittings: F.D.A. compliant engineered plastic is corrosion and U.V. resistant. ■ Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. ■ Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on. ■ Protected Mechanical Seal: Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry. ■ Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve.
SPECIFICATIONS
Pump: • Pipe connections: 1¼" NPT suction / 1" NPT discharge. • Pressure switch: AS4 preset (30-50 PSI).
Motor: • NEMA standard. • 60 Hz. • ½ – 1½ HP, 115/230 V capacitor start. • Single phase. • 3500 RPM. • Built-in overload with automatic reset. • Stainless steel shaft. • Rotation: clockwise when viewed from motor end. • UL778 listed. • Maximum temperature: 140°F.
FEATURES
■ Compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. ■ Serviceable: • Back pullout design allows disassembly of pump for service without disturbing piping. • Two compartment motor for easy access to motor wiring and replaceable components. • Nozzle clean out plug in pump case. • Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring design fittings need only be hand tight to seal. ■ Impeller: F.D.A. compliant, glass filled Noryl ® is corrosion and abrasion resistant. ■ Diffuser (Guidevane): Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan® for durability and abrasion resistance. ■ Tubing and Fittings: F.D.A. compliant engineered plastic is corrosion and U.V. resistant. ■ Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. ■ Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on. ■ Protected Mechanical Seal: Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry. ■ Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve.
SPECIFICATIONS
Pump: • Pipe connections: 1¼" NPT suction / 1" NPT discharge. • Pressure switch: AS4 preset (30-50 PSI).
Motor: • NEMA standard. • 60 Hz. • ½ – 1½ HP, 115/230 V capacitor start. • Single phase. • 3500 RPM. • Built-in overload with automatic reset. • Stainless steel shaft. • Rotation: clockwise when viewed from motor end. • UL778 listed. • Maximum temperature: 140°F.
All sale prices are good online only
